• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

MrMarty51's latest activity

  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    Yes connect the solenoid so you can see it move. Enjoy the beers LOL have one for us too 🍻
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Roger that…not to firmilar with probing electric but can pull the solenoid and eyewitness if it moves stupid question but I should make...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    Ok so we now have confirmed your getting fuel to the IP. was this by gravity feeding from a remote fuel can or by the truck tank and...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    I’m having a few beers to try and get lucky and forget…get a fresh start tomorrow…the lift pump looks pretty old…does pump but maybe not...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    I’m pumping fuel to the IP..disconnected at the IP and fuel pumped into a 2L jug and then took out the cut off solenoid and screwed it...
  • MrMarty51
    MrMarty51 reacted to ak diesel driver's post in the thread Eye connectors with Like Like.
    unless your trying to monitor how much fuel is coming out of the return line you can just leave it hooked the the truck fuel tank
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    I thought I was checking to see if the IP was functioning
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Not sure what I’m doing…I thought 💭 it was not to use the LP and siphon straight into the IP…I was thinking 🤔 putting siphon hose...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    if I understand your bypassing the fuel tank and lift pump and trying to use a jerry can of fuel to get the engine started... using a...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    I must not be understanding right…I unplugged the L P and hooked up a 5/16 to the inlet and 1/4 to the return and hung 1/2gallon of fuel...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    There should be a fuse and relay for the lift pump in the under hood fuse box. but that only will disable it during cranking. if you...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Or what wire and color could I splice into
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Thank you…any quick tips on disabling and still use the ladder technique?
  • MrMarty51
    MrMarty51 reacted to jrsavoie's post in the thread Eye connectors with Like Like.
    I always install a toggle switch under the hood to run the lift pump, so I usually give a little bit of fuel as hooking up to the IP, to...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Thanks important info…I kind of put 2+2 together after I posted as some other members mentioned about coolant passage…I am sometimes...
Show older items
Back
Top