I changed the selector switch in the dash and cleaned the grounds along the drivers side frame rail. The Service 4WD light is still coming on. How hard is it to change the t-case encoder sensor or the motor. It seems to be happening more often now.
Thankfully, when driving it is just showing...
Would a half ton burb have the same issue.
I have no lights on the pushbuttons and service 4WD is on the dic.
Sometimes when it is first started you can push the buttons and hear the t-case working. My cheapo code scanner shows no codes
Any thoughts??
Check Rock Auto.
I had both a bad blower motor resisitor and a bad head unit.
If you pull the head unit out and look at the back side and look at the fan speed switch, you should see some darkened and discolored plastic. Mine had actually had melted a little bit.
I ohmed it out and could...
Great thread, when I put on the ATT, I did mine in the engine area.
I replaced some of mine with braided straps that I got at the local farm supply store.
http://www.dieselplace.com/forum/attachment.php?attachmentid=61473&d=1206332902
I have not tried this, but there are many posts about brake adjustment and uneven wear here and on the other site.
My pads on the front wear unevenly and used to pull to the right really bad before I rebuilt the...
I think she wants me to keep my sub so I do not start tweeking hers.
But I will still do it. You know I need that Predator to read codes, at least that is my story. ):h):h):h
Got the code again last night.
Is there a way to check out the MAP sensor with a Digital Multimeter, ohms,voltage current??????
I do not have access to a tech manual.
Actually we are going to keep both Burbs for now.
I bet those people against big vehicles are going to love driving past a house with 2 big burbs in the driveway.
It did not defuel, still ran the same. The air filter is about 7 weeks old, but maybe the cheapy air filter I bought is too restrictive.
I was thinking it might be the MAP sensor also, with installing the new turbo and changing injectors 2 times in 6 weeks, maybe I damaged something?
I do...