• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Recent content by kmad1999

  1. K

    New Holland L35 skid steer loader revival

    Single wire to the alternator from the coil is the excitor wire. Apparently signals the alternator when to start charging. Problem was the fuel pump not the distributor. Up and running, thanks to your sketches. Haven't ran the wire from the alternator to the battery yet. Not sure what gauge to...
  2. K

    New Holland L35 skid steer loader revival

    I guess I don't understand how that could have sent voltage back to the battery. Everything seems to be working properly. I just don't have fire to the plugs right now. Has to be in the distributor because the coil is hot.
  3. K

    New Holland L35 skid steer loader revival

    For some reason, my alternator only had one wire running to it. It was an 18 gauge wire coming from the coil.
  4. K

    New Holland L35 skid steer loader revival

    Where did you put your ammeter/voltmeter?
  5. K

    New Holland L35 skid steer loader revival

    Outstanding. Thank you.
  6. K

    New Holland L35 skid steer loader revival

    Greatly appreciated.
  7. K

    New Holland L35 skid steer loader revival

    n8in8or, any luck on a sketch?
  8. K

    New Holland L35 skid steer loader revival

    N8in8or, if you could do me a huge favor I'd appreciate it. I lost all reference for wiring on the fire and i can't get it right. Even with the schematic. Mine has the ignition switch and a starter switch (button). If you could tell what you ran to what. Better yet, a rough sketch would be...
  9. K

    New Holland L35 skid steer loader revival

    N8in8or, any movement on the L35 project? Yours is looking great. I'm currently working on mine also. Had hot wire from the ignition to the solenoid wear through the insulation by rubbing on a post on the hour meter, shorted and fried. Caught fire while Iwas clearing felled logs in my pasture...
Back
Top