Recent content by jdugie123

It happens when I get to about 40 mph under moderate throttle. But what I am concerned about is why is it doing this with the stock tune in the truck

Ok I just replaced my CP3 with a almost new LMM CP3 and Regulator what do I need to do tuning wise to make it run better I am throughing a 1093 code and my lift pump is working just fine because I see a little over 5 psi of pressure at idle and driving it stays around 4-5psi also. Here is the...

I was using napa 2 micron filters. Right now the filter I have in there is a Wix 6 micron filter because I thought the 2 micron may be to restrictive but it still does it. I have had the valve in for over a year now so I don't think it is the valve leaking. Does anyone know what voltage the FPR...

I have the ppe race valve in it

ok I am having a low rail pressure code coming up. I have put in two new filters and also put the truck back to the stock tune but I still get the 1093 code and limp the truck. So what should I be looking for to tell if its my FPR or the actual injection pump. Thanks for any help Dugie

I have this unit in my truck I love it. I just need to see if alpine has a new nav disc for the blackbird

I have had both the edelbrock and the ppe and both have failed on me. I got lucky with my first edelbrock the guy I bought it from bought me a new one since it went out with in a month and a half. I am now saving up for the raptor pump that is the same pump on the airdog but it's just the pump...

Hey everyone I am new to this site. I have been on others but am getting bored of the same old same old hoping for something new.