Recent content by hereismylife

Any update on this?

I have a 95 suburban and looking at replacing the ecu and harness. Is 95 all alone or does other years work. Reason asking I thought 95 was all alone. Thank you

looks like there are 3 wiring harnesses. Glove box. Headliner ect. I might just have to sell it.

Great.That is what I thought. it is pretty bad to replace the whole thing from what I recall. I was hoping it would be a connector.

Started at glove box and now trying to see if I can fix it. I need to know if the ecu wiring that goes to firewall has connector or is all one. I see that there is a plug but can't tell if it comes apart. Thanks to anyone that can help.

I dont have a bearing

Yes bearing is out and we are at a small truck stop. Cant get any further because this runs everything. I am from pa but dont have a spare with me.

Anyone near by have a belt tentioner. Broke down heading to Florida

Can you just replace that part alone?

Thank you for feedback. Replaced ip and runs better. I wonder what failed inside.

Had bad fuel. All cleaned up now. Get codes 35 and 36. Ran 2 cycle and oil trick. Still nothing. Changed out opyical sensor and harness. Still nothing changes. Changed fuel filter and blew through lines to tank. It is open. No change. Changed throttle petal. No change. Pmd was replaced by...

Great thank you

I was loking at this adapter again. I guess you take nipple out of the adapter and screw it in the block then you screw on the new adapter for remote location.

I searched this for 2 days now. I found oil filter size which is 13/16 16 but I need to know the thread for the block itself. I thought they were metric but not sure. I dont want to order wrong adapter. Thanks

Also cant take a snap shot to show anyone anything. I can save the memory dump.