• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Goose57's latest activity

  • G
    Goose57 posted the thread Instrument cluster confusion in GM 6.5 Diesel.
    Hi all I’m trying to get “Wait to Start” light working. According to my owners manual I shouldn’t even have a WTS light just a GP light...
    • IMG_1258.jpeg
    • IMG_1259.jpeg
    • IMG_1254.jpeg
    • IMG_1260.jpeg
  • G
    Goose57 replied to the thread Engine cuts out in reverse.
    Hi all here are some more videos. One is of the clear return line and the other two are Tech 2 data and battery voltage on start up and...
  • G
    Goose57 replied to the thread Tech2 scanner.
    Hi guys, I’ve been out in the garage checking the truck out and taking videos. I believe I went through all the grounds, all good. Ran...
  • G
    Goose57 replied to the thread Tech2 scanner.
    Good to know thanks a lot
  • G
    Goose57 reacted to THEFERMANATOR's post in the thread Tech2 scanner with Like Like.
    The chinese knock off tech 2's are well documented as shutting off whenever voltage drops below 12 volts to them. It has to do with the...
  • G
    Goose57 reacted to MrMarty51's post in the thread Tech2 scanner with Like Like.
    Also, what condition is the batteries in ?
  • G
    Goose57 reacted to dbrannon79's post in the thread Tech2 scanner with Like Like.
    is the 12+ line in the OBD connector loosing power during cranking? sounds like this might be the case. Can connect an alternate...
  • G
    Goose57 reacted to dbrannon79's post in the thread Tech2 scanner with Like Like.
    put you a volt meter on the batteries and watch it during cranking. if it drops below 10 volts, the starter could also be drawing too...
  • G
    Goose57 replied to the thread Tech2 scanner.
    Thanks Will, you might be on to something. I turned the parking lights on in my dark garage before the first start up of the day and the...
  • G
    Goose57 reacted to Will L.'s post in the thread Tech2 scanner with Like Like.
    —>DB2 But I doubt you want that route after investing in the ds4ss. Hook up the power source via your battery clamp connections and add...
  • G
    Goose57 replied to the thread Tech2 scanner.
    The IP is the second one from Quadstar. The fist one was defective. The second one was rebuilt and bench tested. I do still have the...
  • G
    Goose57 reacted to MrMarty51's post in the thread Tech2 scanner with Like Like.
    The reason I ask is that if the batteries are down on amps then it could be drawing away enough voltage to kill the power to the scanner...
  • G
    Goose57 reacted to ak diesel driver's post in the thread Tech2 scanner with Like Like.
    Seems like I had to run a wire from the battery to keep it on when I was checking my cranking rpm
  • G
    Goose57 reacted to denata's post in the thread Tech2 scanner with Like Like.
    You can use instead of tech2 to view, record logs, extraneous graphics of engine and transmission parameters ScanXL professional. The...
  • G
    Goose57 reacted to denata's post in the thread Tech2 scanner with Like Like.
    Not sure about OBD 1
Show older items
Back
Top