Recent content by dieselsmoken33

Up Date (Is he blowing smoke up my a$$) Well I had the truck towed over a week ago to the tranny shop that had rebuilt it. Went to check on it last Friday and the shop owner told me he drove on to the rack in 4wd. Then put it back into 2hi and it engages fine now.So he told me to leave it so he...

I did by pass them with a hose line and the hose line was dry. I'm thinking the same thing my pump went out and if it did could it have damaged the tc as well. I also want to say thanks to every one that has replied.

I plugged the cooler ports with some screw on line caps. Unless the caps leaked witch they didn't look like they did but water find its way I guess. Also the the tranny has fluid and its a bit over topped so there is fluid. Also the fluid on the dip stick doesn't look like it has any water on...

I made sure that no water got in the cooler lines but who knows. And if it did would that cause it to have no pressure. I just finished talking to one of the mechanics that I use he said that there should always be pressure even in limp mode. He also said that the pump may have gone out or...

I did disconnect the radiator to clean it.

The cooling up grade was the newer water pump, t stat, and Max fan that was it. I did pull a dtc out and it was 59.

well was thinking about what I did and back tracked my self and noticed that the tranny cooler lines are bone dry. So this means I'm getting no line pressure. What would cause it to have no pressure (pump maybe). Going to finish cleaning grounds tomorrow and see what happens.

I finished up my cooling up grade and went to test drive it and only got R and then D for a second and then lost every thing. The funny thing that every thing worked fine before the cooling up grade. So I backtracked my self and noticed the tranny cooler lines are bone dry. Also noticed that the...

I started cleaning grounds. Its getting a little dark now so will have to resume tomorrow. I also noticed when I disconnected the neg cables from the battery they work spark. Doesn't that mean somethings grounding out. I also checked the voltage to the tranny plug pin E had 11.5 volts.

All I did was change the water pump,t stat, and Dmax fan.

I just finished up my cooling up grade today. Went to take it for a test drive and it went into R okay and then went in to D for just for a few seconds and then nothing tranny will not engage at all. Fluid is okay and smells okay nothing smells or looks burnt. There was no sound of anything...

Just picked up the whole assembly for 25 bones from a yard back east.

I was wondering if I could use my original 93 turbo tube and connect it to the k47 box tubing or will I the rest of the set up.

Count me in.

Will the gmtd scan work on my 93 6.5. It says it's only for 94 and 95. If not what will. Any help will be greatly appreciated. Thanks