Recent content by dan theman

Excuse me are you trying to say that Canadian are felons and terrorist lol

No export so that means Canadians cant by the engine from US gov liquidations is that Wright?

o ok i will

Ok should I go back to diesel kleen +cetane or start using 2 stroke oil

ok thanks

I have this motomaster /Canadian tire 2stroke manufacturer specifies TC-WII or 3 is this stuff safe to use?

Thank you for those measurement

I put on the TM a while back. When I did the injector I removed the bracket off the turbo and left the adjusting nut alone didn’t want to have to readjust the boost level. I do have boost gauge. Im running 5 to 6 LB of boost @2100 RPM and 75 mph is that too much? Im not sure but would the gas...

the truck is the same as in mi signature 97 GMC 6.5t "S" 291 km Z71 3" exhause no CAT thank you

nothing at all in the last two tanks Accept I’m not using diesel kleen +acceted injector cleaner I think that what its call because this injector are new I’m I wrong ?

SAE-30 and how much it might be to late the injector as been in the truck for a couple of weeks and approx 2 tanks of fuel

Bosh origial from Dennis.

Hi Rodd Ho I didn’t know there was a break-in period for injectors. Maybe 2 tanks full. No I did not change the fuel filter. I haven’t got the old injectors tested yet. I will do a LP test this weekend. Seem weird that the MPG drop Wright after the new injectors were put in.

Hi all A couple weeks ago I put in 8 new injectors. All of them were pop tested all within specs of 2100 . I use to get 18 to 18.5MPG now I’m getting 16 to 16.5 MPG why is that? I thought new injectors would give me better not worst MPG. I drive exactly the same way and the same miles to go to...

97 GMC 6.5t "S" 287km Z71 3" exhause no CAT 4l80E + HD transmission cooling from fact, 3.73 axel, new injectors sept 4th, newer glow plug, IP PMD mounted , Gutted Plenum, EGR Block Off,replace IP in 2000, new PMD mounted on skid plate,home made TM