Recent content by brodie

This transmission was rebuilt just 7,000 miles ago before i bought the truck and the owner showed me the receipt and everything

Just checked for codes and it’s throwing code 68 which from what I’m seeing could be anything from input/output shaft speed sensors to needing a transmission revuild

not a big fan of how this connector looks

Welp I just got it to the correct level and no difference. Still fine when cold then starts slipping once I drive around for about 3-5 minutes. All other gears are fine and it’s effecting reverse now.

Gonna try to drain some out right now I’ll let you know if it fixes anything

Not a bad idea I’ll try that tonight

Is there any way to drain the tranny fluid other than dropping the pan on these trannys?

It’s a 1994 Chevy k2500 Suburban. not sure the transfer case model, no modifications done to the truck

Also the truck currently doesn’t have boost because of a bad leak on the crossover pipe to the turbo so that may have something to do with it I believe

I just replaced my flex plate and starter on my 6.5 detroit with a 4l80e. It was running and driving great until 3 days ago when I was going up a pretty steep hill and then it leveled out and wouldn’t shift out of 1st gear. I pulled over and put the truck in park and shut it off then turned it...