• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Recent content by Bobrl

  1. B

    Hello forum. Bob here

    Ok. I will drain the tank and system when i change out the new parts. Thanks
  2. B

    Hello forum. Bob here

    I dont see any bubbles at all in the clear return fuel line though!!!
  3. B

    Hello forum. Bob here

    Hello. Thanks for responce. The fuel i drained off filter , in last post was cloudy, couldnt see thru it! Let container sit a couple days and it was then clear, no milky look and cant see any water in container at all. Does that mean anything?? I have purchased new lp, ops, Leroy diesel ops...
  4. B

    Hello forum. Bob here

    Still have not got into the wiring diagrams!!! Got all replacement parts but havent been able to install them. Need the drawings before i install Leroys mod. !!!
  5. B

    Hello forum. Bob here

    Ok. Thanks for your help!!!
  6. B

    Hello forum. Bob here

    Hello. I have tried to order the wiring diagrams and even called this company last week and they have never registered me ! Did it take some doing for u to get it ???
  7. B

    Hello forum. Bob here

    Hello. Just ordered Leroys OPS mod with the primer sw. spoke to him on the phone , he said to make sure and check the sock on the tank pick up. Need to try that !!
  8. B

    Hello forum. Bob here

    Ok. I just signed up for the service. Thank you!!! I am always looking for wiring diag!!! For every thing!! I know there is a lift pump relay (factory) on the firewall on the passenger side, under the plastic cover. It i belive is brought on with a contact in ignition switch at start up, when...
  9. B

    Hello forum. Bob here

    Hello. Installed clear tube. No bubbles at any time. Idle , rev up, clear fuel! Also i but the drain hose , off of T vavle into a clear bottle and started up engine, opened vavle and nothing comes out!! Not even a drewl !!! Shut off engine and turned key on to start and it filled a 12oz...
  10. B

    Hello forum. Bob here

    Ok. I have some clear tubbing am installing today !! How would you go about finding air leaks??? I also have a 1958 GM 4104 , 6-71 Detroit , Gray Hound RV with the same issues!!!! Thanks so much!!!!
  11. B

    Hello forum. Bob here

    Whats the best way to check for air leaks? Put a vacuum to the system maybe?? Thanks.
  12. B

    Hello forum. Bob here

    Ok guys thanks. I ordered a new lift pump and will install the clear line. And change out the ops and do the mod.
  13. B

    Hello forum. Bob here

    Hello. Thanks for getting back to me!! So a clear tube off the front of the ip to ?? Also where to connect the pressure gauge between the filter and ip ?? It shut down couole time today and i removed the vent plug from top of filter and got suction sound and i unscrewed the filter housing itself...
  14. B

    Hello forum. Bob here

    I hope all is well to all! Beautiful day here in Illinois. I have problem with a newly purchased 92' chevy 2500, 6.5 turbo. F in the vin. I purchased it on a nice warm day and drove it home , around 100 miles. No issues except transmission when cold shifts veryhard! After warm up shifts good! So...
Back
Top