• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Big T's latest activity

  • Big T
    Big T replied to the thread Grading.
    5% means 6” across the 10’ width. I can get close to that.
  • Big T
    Big T replied to the thread Grading.
    Understood. I have a laser for that and property has a natural downward slope front-to-back.
  • Big T
    Big T reacted to ak diesel driver's post in the thread Grading with Like Like.
    Just make sure you factor in the bottom of the slope will need to have a slope lengthwise as well. Need to get that water to go...
  • Big T
    Big T replied to the thread Grading.
    No French drains. They clog and roots grow in them.
  • Big T
    Big T replied to the thread Grading.
    My math was wrong. 10% of 10’ (120”) is one foot or 12”. That is a lot and it would be impossible to pull off here. Distance from house...
  • Big T
    Big T replied to the thread Grading.
    10% over 10’ would be 10” of drop. I am limited on the high side next to the house by the height of the foundations for the AC and Water...
    • IMG_8204.jpeg
  • Big T
    Big T replied to the thread Grading.
    I will check the manual, but I don’t believe it does.
  • Big T
    Big T reacted to ak diesel driver's post in the thread Grading with Like Like.
    I was doing a large garage and had to remove 2-3 feet of overburden and replace with gravel. About halfway through the dumptruck driver...
  • Big T
    Big T replied to the thread Grading.
    I pulled the backhoe off to install the box grader. Controls for the backhoe go with it.
  • Big T
    Big T replied to the thread Grading.
    Not sure I have a float function. I have a 6-position lever to set the height and a locking stop to set the low position.
  • Big T
    Big T reacted to DieselAmateur's post in the thread Grading with Like Like.
    does one of the vertical links on your 3pt hitch arms have a turnbuckle/ telescoping function? You can adjust the angle/ pitch of the...
Show older items
Back
Top