Recent content by Barryt

It has blowed the oil pressure line off twice in the past 2 days what would be causing that? It not a lot of oil just a white line that came with my gauge package, u can see a small amount of oil in it here and there.

Boost gauge installed today and im getting between 5-8 of boost while taking off and it drops as the truck builds speed, so i guess the turbo isnt the problem at all here, Maybe a fueling problem, Wasted $66.00 bucks on a gauge that i will nvr use again!! But it told me my turbo is working...

ok how do i add more fuel to it? and how much do i add? ___________ 1992 chevy 3500HD 6.2 TD

No boost gauge but i can go buy one and tap the intake to intsall it....I do tap the plentume from the turbo correct? Will advancing the timing make it pull more boost or less? ______________ 1992 3500HD 6.2 Turbo

Ok guys got it running better but i cant hear the turbo spooling up could my turbo be bad? still low on power but once it gets going its ok but when i hit a small hill it slows down, SHould i change the spring on the waste gate or wire it open a small amount?

LP runs off the OPS now u can put a test light to it and it runs all the time while the engine is running. ______________ 1992 chevy 3500HD 6.2 turbo

ok guys replaced the valve truck runs better but still NO power its dead from take off till about 30mph do i need to turn some fuel to it? It ran better in the sub i took it from with no turbo, i can be going down the road and floor it and its just like the turbo is dead, I also have a 93 4door...

no one has it here in my town dealer item only!!! i can blow air directly thru either end and it blows freely no restricions!!! also the elbo is flooded with oil so i think thats my blue smoke problem! ________________ 1992 chevy 3500HD 6.2 turbo

whats is the technical name for a cdr? auto zone etc dont know what its called or cant find it.

removed air filter from turbo and i found lots of oil in the elbow.i unhooked the the valve from the valve cover and i have no smoke at all going up the road and very little black,waste gate wired forward and still same amount of power,it does spin freely also it has very little play in it.I...

I just used what was on the 6.5 i had to change the valve cover over to the 6.2. i think im going to hunt a turbo today and c if that takes care of the power problem.

Im running the return line into the old fuel pump oulet, Yes running electric lift pump now, Oil is coming from around all points headed back to the intake manifold, There is oil on the hose conecting to the plentum,there is oil on the front of the turbo where it hooks to the airfilter box, I...

Heres the deal the 6.2 nonturbo was in a sub i bought and i drove it 2k miles it got 18mpg and ran strong to be in that big thing, All i done was change the intake,manifolds,belt system etc, It had very little blue smoke on startup but went away after 2-3 minutes after running, I put it in this...

Ok took it loose ran for a while same thing smoked like crazy at idle, tightened all 6 bolts tight as possible, I took the CDR off and ran it for a while no smoke or oil was coming from it, 3" exhaust looks like factory, I had it cut infront of the muffler and it still did the same thing, Will...

oh it looks pretty new, There is lots of oil in the front of the turbo like where it hooks to the breather,where the turbo and the hose hooks to the plentum there is lots of oil seeping from there. ____________ 1992 chevy 3500HD Dynamic repo truck 6.5 Turbo Auto