I am getting a fuel/injector knock at low idle rev it up about 800 rpm the knock is gone. I try to isolate the knock with long screw driver and a stethoscope, no luck.
It does not smoke and has good power.Cold start up is also good. Any ideas?
In Canada the best price on new Bosch injectors part# 0432217276 try www.thewrenchmonkey.ca at $55.45 cad each. No hidden charges. Free shipping in Canada over $75 order.
With the starter installed with new starter bolts, I tapped the bracket and installed a stainless steel bolt ,flat & lock washer.Now I can sleep at night.
Thanks everyone for the help.
Does anybody know what gauge size of the positive cable on a 1995 c1500 6.5TD? It is on the right side, battery to starter. Is it 2 gauge?
Thanks,Paul.
I noticed on my 95 6.5TD the starter bracket is not fastened to the starter. There is no stud in the housing so I need figure out if it is 1/4" or 6mm threads.Hopefully the stud is not broke off.Is the bracket fastened directly to the starter or are there shims/washers between the bracket & the...
1995 Chevrolet C/K pickup trucks have a 7-wire trailering harness as stardard equipment.The 4 wire harness is tucked in between the spare tire & the frame cross member.
The blue & red wires are located under the brake booster & inside the frame at the rear.I am not sure if it is standard on the...
Good to know fellows,thanks for all your replies.What really scares me is dirt entry so I will check for filter fitment and the elbow for any signs of dirt.
I did the air box modifications as per Kennedy Diesel. Then I thought, a heat shield/barrier on the air box cover across from the turbo will keep from some heat away from the air box.It is adhesive heat shield that you purchase in a sheet that you cut to size. I had some left over from a...