WTB used lower timing gear spocket/s

[Burning oil]

Hey everyone.
Im looking to start making a timing gear set for the 6.2 6.5 diesel. I could use a couple lower timing chain sprockets.
I plan to cut off the reluctor ring and use it. Thats a part that does not wear and would take more time/money building one than if I could get one and remove the ring.

It'll be a good way to recycle too :arf: as most used timing chains just hit the trash can anyway.

Let me know what you got.
[email protected]

 

[NVW]

I could give you one Leroy but if you can get them state side the shipping will be a lot less.

 

[Burning oil]

Thanks Leo, Im thinking there has to be hundreds of used ones sitting around different garages in the states. Hopefully someone that has one see's this post.

 

[jrsavoie]

Dang I've pitched 6 of them. If I had one it would be in the bottom of the scrap trailer.

 

[Burning oil]

I know! how many get trashed? It hurts when you discover a need for stuff that pepole just throw away.
If you still have them and the reluctor ring area is not damaged let me know.

 

[jrsavoie]

Will do.

 

[ak diesel driver]

If you get desperate I should have one if I dig in the snow long enough

 

[Burning oil]

I have one coming so far, could use another as a back up. Les I'll let you know if it gets to that point.

 

[Burning oil]

Got one! Thanks ChevyPoor!.
I may need more in the future so remember me before trashing them please.

 

[Chevypoor]

Got one! Thanks ChevyPoor!.
I may need more in the future so remember me before trashing them please.

No problem. Before I throw any 6.5 parts on the scrap pile I will give you PM!