• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Run Cool Hood Louvers

Status
Not open for further replies.

Paveltolz

Доверяй, но проверяй
Messages
2,856
Reaction score
2,207
Location
Saratoga Springs, UT
I installed hood and fender louvers this past week to help vent the hot air out of the engine bay. Got the idea from another forum member, 635 who runs a GM 6.2 w/ 6.5 heads (hence, 6.35 or 635).

The installation write up is originally posted over in the GM 6.5 Diesel Engine section; it is quite long but there's pictures too so. So, in the interest of sharing with the whole community, here's the link to make it easier to find.

http://www.thetruckstop.us/forum/showthread.php?t=23171

They're manufactured and marketed by RunCool Hood Louvers and can be found on the web at http://raceace.com/ (link posted with permission from Mods)

Hope you all enjoy.

Paul
 

Attachments

  • Run Cool Hood and Fender Louvers.jpg
    Run Cool Hood and Fender Louvers.jpg
    34.5 KB · Views: 37
Closing this one - if you have comments to make, please follow the link above and make them in the original thread.

Thanks!
 
Status
Not open for further replies.
Back
Top