Just Finished OE HID Install On The Wrangler

[Mad Maxx]

I Used all OE Equipment for the HID Install. Bulbs, Ballasts, and Replica Shields.

Can't Wait til it gets Dark out and get them Aimed and go for a Ride.

As you can See in the Housing, there is ZERO Light coming Out the Bottom of it. What does that mean? ZERO Glare for Oncoming Drivers, and an almost Razor Sharp Cutoff WITHOUT Projectors.

Here's some Daytime Output Shots:

 

[Mad Maxx]

Here's the Best I could do with a Close-Up of the Beam in the Lamp. Notice no Light Below the 1/2 way Mark.

...and to Show how Efficient with the Heat and Beam Pattern the Housing is, the Bottom of the Lens, where there is no Light coming Out, was Ice Cold, whereas the Top of the Lens was considerably Warmer.

 

[Ed HD]

Looks Great!!

 

[RI Chevy Silveradoman]

Looks good James.

 

[Mad Maxx]

I'm a lil mad though.

They make LED Headlights for these, but the cheapest ones are $400 or $500 for the Pair. The Beam Pattern SUCKS on them. But of course the ones that ARE actually good, are like $500 or $600 EACH!!

I'd really like to Run them, but for something that Costs that much, that can be taken out with 1 Decent Rock Hit, I'm not doin it.

Atleast with the E-Codes I got in now, the Housing is only like $30.

 

[12ga diesel]

They look real sharp on that Jeep! I like them a lot!