Dan Hunter
Truck Terrorist
Anyone have a CT 90? If so, I'd really appreciate it if you could put a scale under the tires. I'm building a receiver hitch hauler to go pick one up and I'd like to calculate a CG and balance it on the hitch.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Help with Honda CT 90
- Thread starter Dan Hunter
- Start date
Dan Hunter
Truck Terrorist
I've been away so long that I've been reading through my old threads and found this. I got the '68 CT 90 I brought home running and learned a lot about the bike...so much so that I've acquired four '68 CT90s - one of which has had an ATC 125m engine transplanted into it and will receive an adapter to attach the rear axle from the three-wheeler this week.
ak diesel driver
6.5 driver
use to ride one of those way way way back
3500GMC
What T F, over
Each 'way' equals 10 years??
ak diesel driver
6.5 driver
that's about right but plus 6-7 more
Dan Hunter
Truck Terrorist
Here's a work in progress shot with the Medusa wiring harness and the rear end mocked up.
The red one is the bike I brought back from Washington state mentioned on a previous thread...something like 4000 miles in 5 days.
NVW
Well-Known Member
You probably spent as much in fuel as it sold for new, my brother has an early 70's model he bought new.