More about the engine and truck. Has a lot done to it, some of the items are a HX40 compressor and HX35 exhaust turbo. Inner-cooler, 18:1 compression pistons, built injection pump putting out 100cc of fuel. Injector pop pressure is 2200 psi. Has coatings on bearings, intake, exhaust. These...
Is the OT bad? The OT is a metering device. I've seen this happen before. The standard that remember from school was 20 or 30 degrees below ambient temp. Also check your charge. I believe that the suburbans where 3lbs with rear AC.
It has very little surface rust. Frame has around 162000. Has front end work done not to long ago. 17000 miles ago.
Engine has 18:1 pistons, engine if I remember was blue printed. Has the heads ported. Timing gear set. Injection pump and injectors setup for truck. I'll get pictures.
Selling 1991 GMC 2500 with a built 6.5 turbo diesel. The engine was built by SCTrailrider. The engine only has 17000 miles on it. I will get pictures up in the next day or two. The engine has somewhere between 15,000 to 20,000 dollars put into it. Has a HX35 exhaust with a HX40 compressor. I...
I would recommend cleaning the condenser and getting the tool to straighten the fins out. One you put te new condenser in it could become contaminated. You could put the plastic plugs in the line and secure them. Then pull a vacuum mad long as it seals the system will be sealed from the atmosphere.