Well i sold the old 6.5 and bought me a 1996 dodge ram 3500 5 speed, 12 valve with the P7100 p-pump. 6 new tires, new lift pump, running no fuel plate, has new 5 inch exhaust paid 5800. Truck runs great and have lots of mods soon to come.
Ok at the shop i work at one of the mechanics replaced all 8 injectors in this ford with the 6.0l. Well 4 of them went bad again so i tore it apart on friday and got the bad injectors out. Well one of the injectors was loose and you can see where the combustion gases was blowing around the...
Ok i currently am a mechanic at a shop here in town working full time. I have a great deal of knowledge but am still learning and ask for help when i need it. I am working on a chevy corsica i think thats what it is. Well the guy brought the car back twice saying it would over heat and me and...
Well I've noticed my low coolent light has been coming on at times. Well today I checked my fluid and it was way low and it looks like coolent has blew out of the over flow bottle , so something cause it to get really high pressure. I'm thinking either athe motor got hot or I have combustion...
Ok i have a 1994 chevy 3500 Vin f . Right now i have a single 6 inch stack, but really would like to go back to a regular exhaust. Im looking for a 4 inch exhaust. Please post pics or your exhaust and name where you got it and what brand it is. Thanks in advance for your input
Ok i just got my ac deleted untill next summer and now its time for the vac pump. Im pretty sure i just need to get a 1 inch shorter belt from what i have heard. Once i get the shorter belt do i just rout it the same way with out the vac pump their. could i see some pics.
I had my truck up on the lift today doing my oil change. So i figured i would check the balancer to see if it was tight. I can grab the pulley and move it back and forth, its somewhat hard to do but it still moves and i would say about 1/4 to 1/2 an inch back and forth. Would this be too much...
yes i know this is illegal, but has anyone done this. I figured i need a new hood anyways why not see what it looks and sounds like , i figure i can just turn my 90 degree down pipe to put up and then cut a hole and get a hood stack kit like this
I have a 1994 chevy 3500 2wd 8 lug truck. I want to convert the rear drums to disc brakes. What year truck would have the disc brake setup that i need, like a 1996 or somethings
Ok i know alot about diesel engines and kknow that its commen for the oil to be black. But what is a safe way for my engine to clean the black stuff off of everything in my engine, without hurting the seals.
It has a rattle noise at idle, im pretty sure it just does it when its warmed up , no other way to explain it , it def coming from inside the trans, its not real loud buy loud enough to annoy the shit out of me is their a way to tell if the 5th gear nut is loose without removing the transmission.
I have a 1994 chevy 3500 with the 6.5. Im looking for the down pipe and cross over kit and cant find one, they all say they are for a 1995-1998 does anyone know if their is a difference in the down pipes will the down pipe advertised for a 1995-1998 fit my 1994 any help thanks here is the ones...
Whats the best way to get this turbo to boost more quickly. I have also wondered why when every i let off the throttle after boosting, when the waste gate comes open its like a couple seconds delay then you hear the whaa through the exhaust, and when i had the gm turbo on it did the whaa noise...
I have a 1973 buick electra 225 with the 455. Its a automatic trans with a/c. I need a picture that shows where all of the vaccum lines go to the carb, dist and vaccum ball anyhelp thanks
Im fixing this car for someone, they paid another mechanic to install a starter and a few months later the housing had cracked on the starter, so this time im going to install it and use some shims, my problem is, their is 2 little and 2 big wires where on the starter do these go any help and...