• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. Will L.

    The Boat Thread

    So why mess with a carburetor if compression is completely wacked?
  2. Will L.

    97 chevy crew cab freon capacity

    Use the weight as an estimate- gauges to charge. So if it calls 36, give it 30 to start then go by the gauges.
  3. Will L.

    97 chevy crew cab freon capacity

    Yes bleed them also. But really when you vacuum it down with both open it should eliminate that. Mute at this point. Now it is rip out the receiver/dryer (always done with new compressor) for replacement, full flush, and try again. If you aren’t 100% the coils are being flushed all the way...
  4. Will L.

    97 chevy crew cab freon capacity

    That’s not a happy find.
  5. Will L.

    The Boat Thread

    Did I misunderstand that you did compression test on it? Is that a 2 stroke?
  6. Will L.

    97 chevy crew cab freon capacity

    You need to charge according to the chart. Like Ferm mentioned, component size changes slightly and the volume inside can change a lot. When ever there is any a/c issues the questions are #1 action once you know it is not air flow (blower motor) related is put gauges on it. High side, low...
  7. Will L.

    Crankshaft position sensor wiring harness

    http://s7d9.scene7.com/is/content/GenuinePartsCompany/2058222pdf?$PDF$ Incase the link dies and someone wants to know in the future:
  8. Will L.

    Crankshaft position sensor wiring harness

    The evo solenoid... you mean someone out there didn’t eliminate one?
  9. Will L.

    Total Seal Gapless rings?

    I’m not new here and still mess things up! Tried adding funny line to my meme and my phone shocked me, I think with 480! Haha
  10. Will L.

    Hello

    At the top of the page on the right is your name. Click it. Then at bottom of the list is “signature” click it. Enter stuff jn the box.
  11. Will L.

    Water pump leak

    Hmm. That could be good or bad. First I have to ask are you 100%? Because they have been made in Paris Arkansas for years. Jic it says made in Paris... If so, New fabrication could mean different assembly of the links, and different metallurgy. Most the double roller chains for hotrod...
  12. Will L.

    Hello

    Welcome! They got you dialed in on this one already. Fill out your signature line with truck details so when you have more questions on it in the future we can help easy.
  13. Will L.

    Crossover Pipe Size

    Those are inductive heat guns and the crappy ones start around $300, with moderate results. Good ones start around $550 and get the majority of them free. The coil on them wears out and the replacement part is usually $100, Around 25 hours per coil. When the gun goes on the fritz it’s...
  14. Will L.

    Total Seal Gapless rings?

    What are his questions? I still cant see them. I see my rhetorical questions from my post that was quoted
  15. Will L.

    Total Seal Gapless rings?

    I’m not seeing it on my phone. My iPhone following technology rule #1? 1. Technology is great, except when it’s not. 2. Unplug it then turn it back on. 3. Ask a teenager. 4. 5.56mm of 77 grain at 2750 fps.
  16. Will L.

    Port matching

    I wouldn’t say dont do it, but take 2 days and work them over. Number and pop the valves out. Unshroud a little and open the bowl. The gasket match while your there. The 6.5 has worse fitment than sbc did, I learned on 18436572, camel back heads, ram horn exhaust mannies, etc. Also why I am...
  17. Will L.

    1997 P30 Gm Stepvan not shifting out of 2nd gear

    Ok first, know that the 4l80e is an amazing transmission so if you end up worst case scenario a complete new one- you’re good for the next quarter million miles. You need to get a scanner And pressure gauge on it. If you don’t have them, ya might do best stopping by a transmission shop for...
  18. Will L.

    Total Seal Gapless rings?

    @differentialdave33@gmail. looks like you have a question but didn’t get it posted. Welcome. Anyway we can help? Oh, looks like i did typo- ..he DOESN’T sell them.. was intent.
  19. Will L.

    5.7 swap to 6.5 diesel

    Yeah, I signed up on a forum for the wife’s 07 fj cruiser and eventually might go read something there again, if it breaks and I taxkle it rather than a shop. So much group think and “if Toyota engineers made it, it is the only answer” haha- When they see the upgrades hers has and I dont...
  20. Will L.

    Will optimizer 6500 heads fit on a 6.2L diesel?

    I would definitely push the optimizer more- (obviously since thats what I bought) but dont think a cut 6.2 is worse than a gm 6.5 block. Endless gobbs of money and a p400 is the answer. Next down the line would be the optimizer with TSP pistons and TSP ported/coated p400 heads. Then next down...
Top