• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. Twisted Steel Performance

    09 Toyota

    My wife's car, a year or 2 ago it developed a bog or hesitation when the throttle was pushed from a stop, like a red light.. We took it to the dealer, they said #2 cylinder coil pack was bad, replaced it, bill was 800-1000$... my bad that time... Now it's doing it again, I'll burn the thing...
  2. Twisted Steel Performance

    Starting Over 93 C3500 18:1

    Did ya have ALL the measurements and alignment's checked ??
  3. Twisted Steel Performance

    Starting Over 93 C3500 18:1

    I'd weld something to the ball a slide hammer could grab and pull it out....
  4. Twisted Steel Performance

    Runaway shut off valve (positive air flow valve)

    In the 6.x crowd I doubt their would be much if any market.. Now if you could add 100hp for bolting on a 50$ item you would sell a few... just the plan truth.... It's a good idea tho, keep thinking Will....
  5. Twisted Steel Performance

    Battery Life Expectancy For 6.2 Diesel Vehicles?

    This isn't in a truck butttttttt Our forklift quit cranking at work last week, the seat never gets raised to check anything, I looked at the battery, it had a inch of dust on it, I removed it and cleaned it up, found a install date tag, it had also been branded with the install date...
  6. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    There's someone on ebay selling new assembly's already "Isonite treated " as well, I sent mine off before I knew about him and had it done and still coated it as well.. I went new when I purchased mine, too many bad cheap sellers to know what your buying so you may be right, not worth the...
  7. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    If ya do both over time the coating will flake off under the wrap or blanket, the condensation from heat to cold over time undermines the coatings... no one recommends both unless they are after yo money...
  8. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    The draw back in coating the inside is the ring has to be cut in a couple pieces to get it out, that requires a new ring purchase.. A new nozzle assembly is required @ 250-300$ then the housing and assembly gets coated, not a easy job, but it is guaranteed to stop the sticking, this is done by...
  9. Twisted Steel Performance

    Drag Racing Setup and Truck

    Seems strange - wanting to build a "dually" drag truck and thinking light weight at the same time.. the logical thing would be a tube frame, short frame truck seems like... but go for it, let us know how it works out... fastest in the world should only be in the 500K area....
  10. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    Steed has lots of youtube videos that show the many things his product can do.. https://www.youtube.com/results?search_query=steeds+tech
  11. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    A few sensors... the program app can be downloaded free.. also he offers free updates to his hardware...
  12. Twisted Steel Performance

    Too fast of an idle.

    Some of that "die electric grease " may help stop a bit of corrosion on the connectors ..
  13. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    Yes... The programing, once fully understood, will make going from a interstate driver to interstate tow rig much more simple and the basic motor performance and stress much more practical.... Keep up the good work, I'll be ready this spring to start testing mine on a chassis dyno...
  14. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    I also thought that looked strange....
  15. Twisted Steel Performance

    Drag Racing Setup and Truck

    OK, I guess I don't really understand if these are questions or explaining what you are doing... I'll just watch and stay out....
  16. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    I found it, I couldn't see if the first time... thanks
  17. Twisted Steel Performance

    Drag Racing Setup and Truck

    What is your location, ie what state or country ? This sounds like gasser head work - the heads: ported -polish -300 grit surface-dimpled-lyned- This doesn't make sense to me , please explain - pistons: dimpled- cut- type-
  18. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    @ak diesel driver, Les, as for the sticking, yes it can be fixed, I haven't run mine yet but have already modified it to stop the trouble, first I bought a new nozzle ring assembly and sent it off and had it "isonite treated" then I coated the assembly, also the housing inside has been coated...
  19. Twisted Steel Performance

    HE351VE with functional VGT on 1997 6.5L

    Have ya made any videos of it in use yet?
  20. Twisted Steel Performance

    Water pumps, Flow Cooler vs stock

    yea I'm not complaining
Top