No haven't moved on just got real busy im sorry guys, my wife and I run a horse and dog rescue plus a boarding facility and we have a few new boarders. Just been very busy I apologize.
I mean I just posted that to show cold starting and stalling. I dont know what else I can record to help you guys. I dont have a computer so copying and pasting and doing a checklist is hard for me.
My truck is sometimes hard starting when cold, will start then stall once maybe 3 or 4 times, then puff white smoke and the ses light will stay on until the truck idles up the drop to idle and the light goes off.
Well the thing is with the 5k pot turned at anything less than all the way it defuels and limps out. The boost will peak at 13 as if shifts, stays around 8-10 at 3800. My lift pump is on a switch so I know it is on and working. I did the fuel pressure check at idle and it is good. How fo I know...
Well I know the limp mode. I had to install the 5k pot by the boost sensor to tell the computer it could takr more boost. I am running 13lbs all out loaded at shifting. Cruising it levels around 2-3. Whats the best way to remove the fuel pump? And if it is plugged would it be causing horrible...
Well it was all stock when I bought it and it was same bad mileage maybe 220miles to a tank of 26 gallons. ..that sucks. I did the few home mods. Hoping for results and got none I dont know what the 6.5 is capable of so I do not know how far off performance is. Its my first diesel so I am in the...
Truck is acts the same since I bought it. Fuel pressure is good at idle not sure at hwy speed. I haven't done a compression test on it because I runs so nice it just doesn't perform. The injectors I am not sure how old and there is very little blowby. Oh and also this truck gets 10mpg's empty. ...
:mad2:pissed off. I have had my truck now for a few months and have done a few simple mods. I am very mad because it does not pull for shit (excuse my french) my truck has major problems pulling my 18' bayliner fishing boat. I put my featherlite all aluminum 16' horse trailet and 1horse and it...
Ok well I spent all day working on this truck, put pads on the front and had to pull the passenger caliper off and use a little elbow grease and a very big hammer but was able to get the frozen piston to release. Working great and free now remarkably as I figured it was junk. But it came out...