1. Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Let the rebuild begin

Discussion in 'GM 6.5 Diesel Engines' started by knkreb, May 8, 2008.

  1. knkreb

    knkreb The Bus Driver is here!

    179
    0
    May 3, 2008
    Delaware
    You folks are on the ground floor. Who wants in to help to rebuild? Now taking volunteers.
     
  2. Hey Kev,

    I have no special knowledge, lot of things to do and not so many time left (even with an understanding wife), but if I can help...;)
     
  3. Acesneights1

    Acesneights1 New Member

    10,018
    10
    May 5, 2008
    Northeast CT
    Kev I'll help. I can rewrite some of the stuff from memory and i copied alot of it before it came down. I was going to rewrite feed the beast from what I did then let TD edit it. I just don't remember all the measurements but i made an extensive list of the fittings involved.If that's cool it will take me a few nights to do it. I can either post it or PM it for correction.I can also do the cooling upgrade/towing. I still have all my pics from when I did mine with dirty rad etc.
     
  4. DEERE3594

    DEERE3594 I welcome everyone...not just Penguins!

    5,009
    4
    May 5, 2008
    NE Ohio
    Same here, but let me know if there is anything i can do, i got a couple hours a day i can spend on here. PM me if you need me.. :wink5:
     
  5. chrisk1500

    chrisk1500 New Member

    875
    0
    May 5, 2008
    Kev - perhaps you should dole out topics....that way we can type them in Word and then copy and paste into a post....

    I'd volunteer for a topic...doesn't matter what the topic is...
     
  6. iamdave0887

    iamdave0887 Here Comes Chaos.....

    1,657
    0
    May 5, 2008
    CT
    i'll help in whatever way i can. gotta repay you guys somehow for all the stuff you taught me. :cheers2:
     
  7. jeffjbar

    jeffjbar Recruit

    244
    0
    May 7, 2008
    Paducah, KY
    X2, I have plenty of time.
     
  8. Turbine Doc

    Turbine Doc Just Another Diesel Guy

    Very easy, pic a topic you are most familiar with and write all you know about it, include pics, and we'll proof it, old FAQ was unweildy as it was a lot of collected post making content, this way we can go topic by topic. PMD/FSD, Boost, Pics of where stuff is etc.
     
  9. bud9899

    bud9899 Recruit

    92
    1
    May 7, 2008
    SE, GA
    Hey,
    What do you think about a thread called "pin outs and diagrams?" I got the idea from a post gmctd made for the pmd pin out. Anyone could add to it. A little bit of organization in a mucked world. I'll start it, if an admin wants to delete it thats fine.

    I'd also like to Jason's tear down and rebuild threads again. Man a wealth of info in there with GREAT pictures documenting everything.
     
  10. nvmtnlion

    nvmtnlion Got 1911?

    390
    0
    May 3, 2008
    I just dug out the removable hard drive with all my 6.5 work pictures on it.. standby for postings.. It will be slow at first, my daughter was in a car crash last night and is in the hospital. She should be out in a day or 2 but it's rocky right now.
     
  11. AlbertaRedneck

    AlbertaRedneck Recruit

    141
    2
    May 5, 2008
    I'll help if I can, don't have a lot of knowledge.
     
  12. Turbine Doc

    Turbine Doc Just Another Diesel Guy

    Sorry to hear that John, you know even from halfway round the world from you know I'll be talking to big guy for you tonight.
     
  13. bud9899

    bud9899 Recruit

    92
    1
    May 7, 2008
    SE, GA
    I do like the little icon characters here.
    :eek:16:Me in the morning.
     
  14. Turbine Doc

    Turbine Doc Just Another Diesel Guy

    Guys just remember when we rebuild here post stuff that is yours, if it's copywritten from another site, ie Diesel Page, we won't be able to post it, pretty much same rule we had for content at old site
     
  15. nvmtnlion

    nvmtnlion Got 1911?

    390
    0
    May 3, 2008
    Thanks Tim, She will be okay in a few days. Seatbelt saved her but she has broken ribs and they had to repair a blood vessel to her pancreas.

     
  16. NVW

    NVW Well-Known Member

    8,338
    702
    May 5, 2008
    Castor, AB.
    I hope she's OK. I'll do what I can also, now is a very busy time for me. Leo
     
  17. Ratman

    Ratman 6.5 Diesel NUTCASE

    390
    21
    May 6, 2008
    Pac NW USA
    John, glad to hear your daughter is ok.

    I too will do whatever I can.
     
  18. Brooklyn Tow

    Brooklyn Tow 9 11 Never Forget

    3,212
    4
    May 6, 2008
    Brooklyn, NY USA
    Sorry about your daughter......Glad to hear she'll be OK......I'll keep you guy's in my prayers.

    Louis
     
  19. DangerousDuramax

    DangerousDuramax Recruit

    48
    0
    May 8, 2008
    Houston, Tx
    Geez...I've got a hard drive FULL of tech info. Guess I'll have to start posting it. :wink5:
     
  20. Ratman

    Ratman 6.5 Diesel NUTCASE

    390
    21
    May 6, 2008
    Pac NW USA
    That's how the other "place" got built, -from the people.

    I looked for the Git 'er Done smiley, -it appears we don't have one.

    We do however have a "peace" smiley,......hmmmm, -interesting.

    We need to fix that "right quick" ):h
     

Share This Page