Buy Viagra with Dapoxetine online at our pharmacy. No prescription required. Lowest price guaranteed. Free Worldwide Shipping. Reorders huge Discount.
buy antibiotics online


THIS AD DOES NOT APPEAR TO REGISTERED USERS!
Results 1 to 12 of 12

Thread: test port fitting

  1. #1
    McLovin stacks04's Avatar
    Join Date
    May 2008
    Location
    terryville ct
    Posts
    3,587
    Member #
    295
    Member of CT Smoke Club



    Default test port fitting

    just wondering if you guys knew if the fuel vacuum test port near the cp3 is called a compucheck fitting. i usually use the kent moore tool but it is getting pretty beat and want to buy my own. snap on can get me one and it looks right in the pic but he can't send it back once it comes in so i want to be sure. thanks
    GOD PLEASE HELP THE USA.
    Those that make peaceful revolution impossible, make violent revolution inevitable.


    Oh Lord, I would live my life in freedom, peace and happiness, enjoying the simple pleasures of hearth and home. I would die an old, old man in my own bed, After a life of enjoying your blessings.
    But if that is not to be, Lord, if monsters should find their way to this corner of the world on my watch, then help me to sweep those bastards from the ramparts, because doing that is good, and right, and just.
    And if in this I should fall, let me be found atop a pile of brass, behind the wall I made of their corpses.

  2. #2
    A(ACLU)Agent Moped Humper samfraser's Avatar
    Join Date
    Jul 2008
    Location
    Bozeman, MT
    Posts
    113
    Member #
    772


    Default

    shrader valve, if i remember correctly.
    1992 Buick Regal Custom
    Member # 62 A(ACLU) Agent Moped Humper
    BUT, buying synthetic oil has a big advantage, you're not funding terrorism! - One of my many pearls of wisdom.):h

  3. #3
    McLovin stacks04's Avatar
    Join Date
    May 2008
    Location
    terryville ct
    Posts
    3,587
    Member #
    295
    Member of CT Smoke Club



    Default

    yeah inside the fitting, but the outside quick connect part. it has a name i just forgot it.
    GOD PLEASE HELP THE USA.
    Those that make peaceful revolution impossible, make violent revolution inevitable.


    Oh Lord, I would live my life in freedom, peace and happiness, enjoying the simple pleasures of hearth and home. I would die an old, old man in my own bed, After a life of enjoying your blessings.
    But if that is not to be, Lord, if monsters should find their way to this corner of the world on my watch, then help me to sweep those bastards from the ramparts, because doing that is good, and right, and just.
    And if in this I should fall, let me be found atop a pile of brass, behind the wall I made of their corpses.

  4. #4
    A(ACLU)Agent Moped Humper samfraser's Avatar
    Join Date
    Jul 2008
    Location
    Bozeman, MT
    Posts
    113
    Member #
    772


    Default

    i dunno??
    1992 Buick Regal Custom
    Member # 62 A(ACLU) Agent Moped Humper
    BUT, buying synthetic oil has a big advantage, you're not funding terrorism! - One of my many pearls of wisdom.):h

  5. #5
    v- I miss this truck. -v 83GMCK2500's Avatar
    Join Date
    May 2008
    Location
    Ellensburg, WA through Poulsbo, WA through Pullman, WA through Dayton, WA FROM Othello, WA
    Posts
    2,256
    Member #
    41



    Default

    dohickus? thinga-ma-bob? dobasary? I know... widget.
    Devin


    1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt. Been in the family since new, see it's history in My Garage.

    ╔═══╦═══╦═══╗
    ╠═══╬GMC╬═══╣
    ╚═══╩═══╩═══╝

    R.I.P Jason (willyswanter) Payne

  6. #6
    modified
    Join Date
    May 2008
    Location
    NE Wisconsin
    Posts
    27
    Member #
    559


    Default

    Never did hear a Manufacturer name.
    Kennedy sells the fitting with a gauge. Don't know if he'd sell the fitting only.

    http://www.kennedydiesel.com/detail.cfm?ID=289
    2002 Chev 2500HD D/A X-Cab LB 4X4.

  7. #7

    Default

    Quote Originally Posted by modified View Post
    Never did hear a Manufacturer name.
    Kennedy sells the fitting with a gauge. Don't know if he'd sell the fitting only.

    http://www.kennedydiesel.com/detail.cfm?ID=289
    how tough would it be to hook a fuel pressure guage here such as the autometer cobalt, what part would need to be bought to hook the autometer sensor here.
    2004 LLY
    EFI Live
    71.5mm Cheetah
    LBZ Intake
    5" Straight Piped
    Fass 150/150
    SD Modded Regulator

  8. #8
    Do chickens have large talons Sparky8370's Avatar
    Join Date
    May 2008
    Location
    New Hampshire
    Posts
    1,718
    Member #
    25


    Default

    Quote Originally Posted by LarryJewell View Post
    how tough would it be to hook a fuel pressure guage here such as the autometer cobalt, what part would need to be bought to hook the autometer sensor here.
    I don't think that would do you any good. Unless you have a lift pump and want to check that pressure. I would think that normally that would have vacuum since it's before the cp3. If you pump the shit out of the primer you can get a good squirt out of it, but that should be the only time there is pressure on it, other than a lift pump being used.
    Jay

    2001 2500HD Ex Cab,AFE 4" turbo back,K&N filter,boost and pyro, going to put in oil temp too,EFI Live,Suncoast stage IV
    Member #80 (A)ACLU

    The thing about common sense is, it's not too common.

    Real trucks don't have spark plugs. #2 is the shit.

    I know what you're thinking. Did he tune with EFI Live or not? Well, to tell you the truth, in all this excitement, I've kinda lost track myself. But being as this is a 6.6 litre Duramax, the most powerful production diesel pick-up engine in the world, and would blow your doors clean off, you've got to ask yourself one question: 'Do I feel lucky?' Well, do ya punk?

    <object type="application/x-shockwave-flash" data="https://clients4.google.com/voice/embed/webCallButton" width="230" height="85"><param name="movie" value="https://clients4.google.com/voice/embed/webCallButton" /><param name="wmode" value="transparent" /><param name="FlashVars" value="id=2290f234508ad6bd86ae37e75ee1fa9c6a0d7204 &style=0" /></object>

  9. #9
    Disturbing peace since 83 mytmousemalibu's Avatar
    Join Date
    May 2008
    Location
    Kansas
    Posts
    71
    Member #
    681


    Default

    I got one from my Snap-On guy! Its actually from Star Tools. But works great, no problems, and reads vac/psi if ya have an LP
    Attached Images Attached Images
    03 2500HD
    Ind. Injection Dual Feed Line, BD/TiAL BOV, BD Fullbore,
    Coolingmist Stage2 M/W, TTS fuel pick-up, S&B intake, 6" exh, In-cab boost control
    50% ExtrudeHone nozzles, Modded CP3, MytNasty Tuned!
    EFILive V2
    Plugged intake heater, Summit billet LP
    LOWERED-Nowadays
    "Stomp on the right pedal club" Member#2

    "Side Exit Boy" #1

  10. #10

    Default

    Quote Originally Posted by Sparky8370 View Post
    I don't think that would do you any good. Unless you have a lift pump and want to check that pressure. I would think that normally that would have vacuum since it's before the cp3. If you pump the shit out of the primer you can get a good squirt out of it, but that should be the only time there is pressure on it, other than a lift pump being used.
    I have a lift pump, I was wanting to moniter how much I am pulling the lift pump down on WOT. Right now I have the gauge sensor screwed into the port on the lift pump which is only telling me that the lift pump is working, it doesnt show if I'm pulling it down on a hard run.
    2004 LLY
    EFI Live
    71.5mm Cheetah
    LBZ Intake
    5" Straight Piped
    Fass 150/150
    SD Modded Regulator

  11. #11
    McLovin stacks04's Avatar
    Join Date
    May 2008
    Location
    terryville ct
    Posts
    3,587
    Member #
    295
    Member of CT Smoke Club



    Default

    larry, put a gauge in the bleeder screw fitting of the filter housing. far enough up the line for the gauge.

    mytmouse, i got the part number from the pic you posted at mcrats site and my dealer can't get it. i have to go to there site and order it. but thanks for the pic anyway it helped.
    GOD PLEASE HELP THE USA.
    Those that make peaceful revolution impossible, make violent revolution inevitable.


    Oh Lord, I would live my life in freedom, peace and happiness, enjoying the simple pleasures of hearth and home. I would die an old, old man in my own bed, After a life of enjoying your blessings.
    But if that is not to be, Lord, if monsters should find their way to this corner of the world on my watch, then help me to sweep those bastards from the ramparts, because doing that is good, and right, and just.
    And if in this I should fall, let me be found atop a pile of brass, behind the wall I made of their corpses.

  12. #12

    Default

    Quote Originally Posted by stacks04 View Post
    larry, put a gauge in the bleeder screw fitting of the filter housing. far enough up the line for the gauge.

    mytmouse, i got the part number from the pic you posted at mcrats site and my dealer can't get it. i have to go to there site and order it. but thanks for the pic anyway it helped.
    Which part was it, if its the LBZ turbo inlet, the dealers computers show them as backordered, but I have been able to get 2 recently because my dealer makes a phone call rather than just checking on the computer.

    If thats not the part, let me know what your looking for, i'll see what I can do.
    2004 LLY
    EFI Live
    71.5mm Cheetah
    LBZ Intake
    5" Straight Piped
    Fass 150/150
    SD Modded Regulator

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •