Buy Viagra with Dapoxetine online at our pharmacy. No prescription required. Lowest price guaranteed. Free Worldwide Shipping. Reorders huge Discount.
buy antibiotics online


THIS AD DOES NOT APPEAR TO REGISTERED USERS!
Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Engine oil cooler kit

  1. #1
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default Engine oil cooler kit

    I am now selling an engine oil cooler kit.
    This is a direct replacement cooler and custom hoses. The cooler bolts right where your stock cooler was. You will reuse the brackets from the core suport to the cooler. The hoses are rated to 300 psi and 400 degrees F.
    $199.00 + shipping. www.pmdcable.com
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  2. #2
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default Dtr member special

    For DTR members only!!

    I am going to offer a Perma Cool oil thermostat for my oil cooler kits.
    You will have the option of
    1. A free perma cool oil thermostat
    OR
    2. $40 off the price of the cooler kit = $159. for a kit w/out thermostat.
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  3. #3
    Registered User ak diesel driver's Avatar
    Join Date
    Feb 2009
    Location
    alaska
    Posts
    9,313
    Member #
    2334


    Default

    Will your offer be good next winter?
    96 gmc k2500 4" exhaust, marine inj, #9 resistor, GL4, turbomaster, duraterms,-1.94 TDCO,FTB, remote pmd, isspro pillar gauges, lift pump relay added ,141 block, 2 1000 w block heaters, 2 150w glue on oilpan heaters, 2 150w glue on transpan heaters, 97 K47 air filter , IP replaced at 229k ,gear drive set awaiting install, Parts for intercooler waiting to be installed

    94 k1500 excab sb 6.5 plow truck. Fisher plow w/engine driven pump, F intake, h/m turbomaster, plowing chip by Buddy, remote PMD w#9 resistor, Duraterms

    96 k3500 CC 6.5 dually
    94 k2500 excab lb 6.5 parts truck
    00 burb 5.3 wifes
    70 Ford reg cab lb 428 cj richmond 5spd lockers 35s
    75 Vette built 383 needs work
    62 Tempest convertible way on the back burner project
    85 Honda VF1000R
    90 P30 Cummins BT4 work van
    90 Int SA dump w/trailer
    416c backhoe

  4. #4
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default

    Quote Originally Posted by ak diesel driver View Post
    Will your offer be good next winter?
    Should be, you will just have to get with me at that time.

    Also, just alittle FYI. This cooler is made by the same company that makes the B&M cooler, but witout the B&M name, so it costs less!
    The hoses are made with industrial stentgh hoses and are availible in "stainless steel braided teflon lined" hoses as well.
    Before you buy anywhere else ask me and I will beat the price. The quality of this kit is exactly the same as you would buy anywhere else we just charge less for it and include a free oil thermostat.
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  5. #5
    Manual Trans. 2WD Enthusiast GM Guy's Avatar
    Join Date
    May 2008
    Location
    NW Kansas and SC Idaho
    Posts
    4,312
    Member #
    144
    Member of Flatbed Club



    Default

    is this offer still good?

    Also, would you recommend the t-stat for my climate, or is it best reserved for the canadian climate?
    Running Fleet: good enough to be tagged. need little things.
    99 Chev C3500 6.5TD NV4500 14 bolt 2wd 4.10 130K White Ext, Gray Int. RC 159.5"WB DRW Chassis Cab w/ utility bed, getting flatbed. needs PS pump
    95 GMC C2500HD 6.5TD NV4500 14 bolt 2wd 4.10 148K White Ext, Grey Int. RC 131.5"WB SRW Fact. box-off PU has bare frame & B&W, growling trans, strong but blowby rich.
    95 Chev C3500HD 6.5TD NV4500 D80 2wd 5.13 206K White Ext. Tan Int. RC 135.5" WB DRW Chassis Cab w/ utility bed w/ manlift needs HB and TLC.
    93 Chev K2500HD 6.5TD NV4500 14 bolt 4wd 4.10 255K White/Red Ext, Red Int. ECLB 155.5" WB SRW Pickup needs IP.
    91 GMC C1500 6.2NA SM465 10 bolt 2wd 3.42 70K Red Ext, Red Int. RCLB 131.5"WB SRW Pickup needs injectors.
    91 Chev C1500 4.3L 5LM60 10 bolt 2wd 3.42 ??K White Ext, Red Int. RCLB 131.5"WB SRW Pickup needs clutch and rear end rebuild.

    Project Fleet: major mechanical issues to prevent operation.
    96 GMC C2500HD 6.5TD NV4500 14 bolt 2wd 3.73 240K White Ext, Blue Int. ECLB 155.5"WB SRW Pickup needs engine
    96 Chev K2500HD 6.5TD NV4500 14 bolt 4wd 3.73 287K Grn/Tan Ex, Tan Int, ECLB 155.5"WB SRW pickup, fixing for accurate 2wd v 4wd mpg compare with above. needs trans.
    95 Chev C3500HD 6.5TD NV4500 D80 2wd 5.13 132K White Ext, Grey Int. RC 159.5"WB DRW Chassis Cab with flatbed bad heads, needs engine
    94 GMC C2500HD 6.5TD 4L80E 14 bolt 2wd 3.73 300K White Ext, Blue Int. Suburban needs engine
    94 Chevy C2500HD 6.5TD NV4500 14 bolt 2wd 4.10 290K Gold Ext. Tan Int. ECLB 155.5"WB SRW pickup. needs engine.
    94 Chevy C1500 6.5TD 4L80E 10 bolt 2wd 3.08 28xK Maroon Ext. Red int. Mint condition (save for surface rot on ext. cab) needs engine.

    Junk fleet: never to see the road again.
    91 GMC K2500LD 6.2NA 700R4 4wd, in many pieces; 95 GM bare Extended cab; 99 GM 3500 DRW front frame chunk; 4 NV4500s; 3 extra engines, many other parts.

    Proud Member: #144 of DTR.com; #19 Brotherhood of Handshakers; #35 3500 Dually Club; #4 Flatbed Club; #10 Spark Plug Club

    Parent's: 98 GMC C3500 5.7L NV4500 208K RC 11ft bed chassis cab needs HG's ; 92 GMC C3500HD 6.5L NV4500 160K RC 11ft bed chassis cab needs bellhousing ; 93 GMC C3500HD 6.5L 4L80E 260K RC 11ft bed chassis cab needs bed. ; 95 Chev C2500HD 6.5L 4l80E 121K RCLB needs cooler lines ; 98 Chev K2500HD 6.5L 4L80E 280K ECSB needs TLC ; 96 Chevy C3500 6.5L 4L80E 78K RCLB DRW, 8ft flatbed. 92 Chevy C3500 5.7L NV4500 169K RCLB DRW 8ft flatbed.

  6. #6
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default

    Sorry guys, I did honor that deal as long as I could, but my cost on the hoses and cooler went up. $199 w/out thermostat.
    The tstat mainly allows quicker warm up.
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  7. #7
    02GMCtruck 88gmctruck's Avatar
    Join Date
    Mar 2009
    Location
    Covington, Wa: From Albion, Wa: from Pullman, Wa: from Edgewood, Wa
    Posts
    1,772
    Member #
    2501


    Default

    I'm curious what fitting the cooler itself uses (the thread size).

    I'm adding an external cooler to my 88 and have the stock lines for the cooler (the ones with the o-ring seal). Does this kit work with stock style lines? If so, is the cooler available separate?

    Or possibly, anyone who has upgraded their setup have their stock cooler left over and want to part with it?
    Dave --- "My trucks either have 3 letters on the grille, or are dressed in formal attire"



    88 GMC K1500; 9" SAS/D44/14FF Detroit/NV4500/NP241/TBI454, GMT800 Mirrors, E-codes & 8 HIDS
    95 Alpenlite Silverton 11'; Optioned out, Full LED.
    98 "GMChevy" K3500; Crew Dually, 454 NV4500, Steering wheel audio, OH console w/ S-10 trip computer, GM LED cab lights, HIDs, Torklift camper mounts & superhitch, BLACKED OUT
    02 GMC K1500; HT pkg, HD bumper, lowered 2", OEM SS wheels, Denalis/e-code headlight leveling/8 HIDs, Steering wheel audio, OH console w/ Denali trip computer

    Member #1 of the Spark Plug Club
    Member #12 of the Regular Cab Club
    DTR Brotherhood of Handshakers #36

    78 Nomad 19' RV; Restored, 5" lift, 225/75R15, LED lights, Delco HU, Extended Tongue, Onboard Air -Sold 8/14
    99 Chevy K2500; 6.5L/NV4500/14FF, PY0s, GMT800 mirrors, OH console w/temp, Steering wheel audio, diamond plate rails, Crossover box w/ onboard air, Firestone bags
    3" straight pipe, Relocated PMD on Pentium 4 CPU heatsink W/#9. Sold 3/12 at 158,784 miles

  8. #8
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default

    Hi, ports on my cooler are 1/2" pipe. Won't work with stock hoses.
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  9. #9
    Brain Damaged Diesel Junkie dangerousdave's Avatar
    Join Date
    Jul 2009
    Location
    Somewhere South of SanDiego, California
    Posts
    1,469
    Member #
    2931
    Member of Old School Smokers



    Default

    Thanx again for the quick service, Walbro, oil cooler and fittings, OPS ext kit ; all well recieved.

    So, which is it, League City or Webster?
    I was working the Houston area for 12 years; Freeport to Conroe, Sealy to Mont Belvue.
    Lots of great people down there.
    Lived near Jersey Village, FM1960... We could put on some coffee and tell some lies, er stories.
    Not as Dangerous as I used to be Dave

    http://www.silent-warriors.com/ Veterans of America Club, member #25
    1994 Suburban 6.5TD C2500 "F", 3.73 gears, 4L80E, 265K+ miles. Heath clone bumper mount fsd, custom S&B 5x9 intake, home grown TM, Flowmaster DP and X-over, hollow soot trap, Biodiesel rated fuel lines, http://leroydiesel.com/ (Burning Oil) OPS ext. hose kit, oil cooler kit, Walbro LP. Racor pre LP filter, removed tank sock, Fuel press and boost gauges, fuel pressure gauge isolator, moved PS battery to fender, Lubrilon engine treatment, 21.2 average mpg, added air dam to improve cooling and mpg; .6mpg better now. 1 qt ND30 per 20 gallons of fuel, PS gray bottle per instructions for maintenance; keeps the injectors clean

  10. #10
    Truck Terrorist Dan Hunter's Avatar
    Join Date
    May 2008
    Location
    Enid, OK
    Posts
    444
    Member #
    655


    Default

    A bit of a bump here.

    I finally got around to installing my lines I'd purchased months ago. Other than a bit of grinding on the exhaust flange, there were no surprises...on the install.

    The replacement factory lines that came out were a bit of a surprise. One of the lines was off angle to the flow and looked like it was about to come off!

    Whatever you do, pull you factory lines and replace them. Burning Oil, thanks for making these kits available. Yeah, I could have gone to the trouble of assembling all the fittings myself and...wait, no I couldn't.

    Again, thanks.
    94 K1500 "S" extended cab, Parker Duck Boat paint in Bay Gray (applied with a roller), custom one-off Bramco flatbed, Heath PMD Isolator, Heath Turbomaster, Heath HO LP, Heath chip, Bosch injectors, 4" straight pipe, EGR block-off plate, AC/Delco 60G glow plugs and manual controller, fender fresh air mod, bronze battery terminals, Lubrication Specialist 6.5TD Oil Lines/Cooler, boost and EGT gauges. Radio delete. 9000# front hitch (aka "The Rhino horn"). Last oil change at 165,000 miles - Feb 2014

  11. #11
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default

    Hey thanks Dan, I see in your signature you have another vendor listed for your Oil cooler kit? Did you buy it from me? sorry I can't remember that far back.
    Glad you got her fixed up.
    Leroy
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  12. #12
    Brain Damaged Diesel Junkie dangerousdave's Avatar
    Join Date
    Jul 2009
    Location
    Somewhere South of SanDiego, California
    Posts
    1,469
    Member #
    2931
    Member of Old School Smokers



    Default

    Your kit (Leroy) is great. I just wish you had an instruction like," using a sawzall, bolt cutters, or a cutoff tool, remove old hoses... don't try to save this old junk, as it WILL be trashed and you can't sell it on flea-bay."

    Of course, if you had worked for GM and made them put this system on at the factory, you'd get nothing back.
    Not as Dangerous as I used to be Dave

    http://www.silent-warriors.com/ Veterans of America Club, member #25
    1994 Suburban 6.5TD C2500 "F", 3.73 gears, 4L80E, 265K+ miles. Heath clone bumper mount fsd, custom S&B 5x9 intake, home grown TM, Flowmaster DP and X-over, hollow soot trap, Biodiesel rated fuel lines, http://leroydiesel.com/ (Burning Oil) OPS ext. hose kit, oil cooler kit, Walbro LP. Racor pre LP filter, removed tank sock, Fuel press and boost gauges, fuel pressure gauge isolator, moved PS battery to fender, Lubrilon engine treatment, 21.2 average mpg, added air dam to improve cooling and mpg; .6mpg better now. 1 qt ND30 per 20 gallons of fuel, PS gray bottle per instructions for maintenance; keeps the injectors clean

  13. #13
    LeroyDiesel.com Burning oil's Avatar
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    7,447
    Member #
    2218


    Default

    Thanks Dave, I appreiciate that.
    Leroy.
    www.leroydiesel.com <<< CLICK
    We sell pmd extension cables and the FS PMD or the new Stanadyne PMD with available 7 year warranty.Turbo Boost Bolts and lots of 6.5 turbo diesel parts. Check out the web site.
    Be sure to update your signature with products you bought from me.
    1 ton, crew cab, 6.5 diesel w/DB2 4911 IP. srw.
    1994 2wd Suburban.

  14. #14
    Manual Trans. 2WD Enthusiast GM Guy's Avatar
    Join Date
    May 2008
    Location
    NW Kansas and SC Idaho
    Posts
    4,312
    Member #
    144
    Member of Flatbed Club



    Default

    thought i would give an update on your kit. installed it this spring, rightbefore a jaunt to idaho,to california, back to ID from CA, then back to KS. no leaks, all and all pretty good deal. good thing we changed them too, as they were seeping pretty good at the block connection.

    I would recommend everyone to do something about their OEM lines, as they are a problem.
    Running Fleet: good enough to be tagged. need little things.
    99 Chev C3500 6.5TD NV4500 14 bolt 2wd 4.10 130K White Ext, Gray Int. RC 159.5"WB DRW Chassis Cab w/ utility bed, getting flatbed. needs PS pump
    95 GMC C2500HD 6.5TD NV4500 14 bolt 2wd 4.10 148K White Ext, Grey Int. RC 131.5"WB SRW Fact. box-off PU has bare frame & B&W, growling trans, strong but blowby rich.
    95 Chev C3500HD 6.5TD NV4500 D80 2wd 5.13 206K White Ext. Tan Int. RC 135.5" WB DRW Chassis Cab w/ utility bed w/ manlift needs HB and TLC.
    93 Chev K2500HD 6.5TD NV4500 14 bolt 4wd 4.10 255K White/Red Ext, Red Int. ECLB 155.5" WB SRW Pickup needs IP.
    91 GMC C1500 6.2NA SM465 10 bolt 2wd 3.42 70K Red Ext, Red Int. RCLB 131.5"WB SRW Pickup needs injectors.
    91 Chev C1500 4.3L 5LM60 10 bolt 2wd 3.42 ??K White Ext, Red Int. RCLB 131.5"WB SRW Pickup needs clutch and rear end rebuild.

    Project Fleet: major mechanical issues to prevent operation.
    96 GMC C2500HD 6.5TD NV4500 14 bolt 2wd 3.73 240K White Ext, Blue Int. ECLB 155.5"WB SRW Pickup needs engine
    96 Chev K2500HD 6.5TD NV4500 14 bolt 4wd 3.73 287K Grn/Tan Ex, Tan Int, ECLB 155.5"WB SRW pickup, fixing for accurate 2wd v 4wd mpg compare with above. needs trans.
    95 Chev C3500HD 6.5TD NV4500 D80 2wd 5.13 132K White Ext, Grey Int. RC 159.5"WB DRW Chassis Cab with flatbed bad heads, needs engine
    94 GMC C2500HD 6.5TD 4L80E 14 bolt 2wd 3.73 300K White Ext, Blue Int. Suburban needs engine
    94 Chevy C2500HD 6.5TD NV4500 14 bolt 2wd 4.10 290K Gold Ext. Tan Int. ECLB 155.5"WB SRW pickup. needs engine.
    94 Chevy C1500 6.5TD 4L80E 10 bolt 2wd 3.08 28xK Maroon Ext. Red int. Mint condition (save for surface rot on ext. cab) needs engine.

    Junk fleet: never to see the road again.
    91 GMC K2500LD 6.2NA 700R4 4wd, in many pieces; 95 GM bare Extended cab; 99 GM 3500 DRW front frame chunk; 4 NV4500s; 3 extra engines, many other parts.

    Proud Member: #144 of DTR.com; #19 Brotherhood of Handshakers; #35 3500 Dually Club; #4 Flatbed Club; #10 Spark Plug Club

    Parent's: 98 GMC C3500 5.7L NV4500 208K RC 11ft bed chassis cab needs HG's ; 92 GMC C3500HD 6.5L NV4500 160K RC 11ft bed chassis cab needs bellhousing ; 93 GMC C3500HD 6.5L 4L80E 260K RC 11ft bed chassis cab needs bed. ; 95 Chev C2500HD 6.5L 4l80E 121K RCLB needs cooler lines ; 98 Chev K2500HD 6.5L 4L80E 280K ECSB needs TLC ; 96 Chevy C3500 6.5L 4L80E 78K RCLB DRW, 8ft flatbed. 92 Chevy C3500 5.7L NV4500 169K RCLB DRW 8ft flatbed.

  15. #15
    Registered User
    Join Date
    Apr 2010
    Posts
    3,919
    Member #
    5783


    Default

    Anyone have installed pics?

Page 1 of 2 12 LastLast

Similar Threads

  1. Engine oil cooler kit. Now ready
    By Burning oil in forum GM 6.5 Diesel Engines
    Replies: 32
    Last Post: 04-08-2009, 08:32 PM
  2. 6.5 td oil cooler
    By dago diesel in forum GM 6.5 Diesel Engines
    Replies: 7
    Last Post: 12-23-2008, 12:09 PM
  3. Aftermarket Engine Oil Cooler Kit......
    By mfgguru in forum GM 6.5 Diesel Engines
    Replies: 14
    Last Post: 11-15-2008, 07:33 PM
  4. Oil Cooler
    By Rodd in forum GM 6.5 Diesel Engines
    Replies: 15
    Last Post: 10-03-2008, 10:33 PM
  5. Oil Cooler
    By Bulldogger in forum 06-07 LLY/LBZ
    Replies: 1
    Last Post: 06-27-2008, 09:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •